Material:

• Carbon.
• The rear spoiler is sealed with clearcoat.
• The materials are UV and temperature-resistant.
• Material information: The carbon products are handmade. The tailoring and draping of the tissue layers, the curing process of the plastic matrix and the milling of the raw parts take several hours. A special challenge is the subsequent finishing. In order to reinforce the depth effect, parts become a repeated varnish. Every single coating layer has to be dried and cutted afterwards. After applying the last coat of varnish, the carbon products will be polished to high gloss (exceptions are the open pored carbon designs). The carbon products are qualified by applicable BMW standards. This is the only way to ensure that the high requirements,f. e. age- and temperature-resistant without crack formation or varnish delamination of the substrate can be met and to avoid yellowing of the matrix. This high grade of handmade and qualification expenses is responsible for the price.

Additional Information:

BMW recommends installing both the front and rear aerodynamics products at the same time to maintain the aerodynamic balance of the car. You may be interested in the wide range of front splitter/spoiler we offer for the F8X M cars HERE.

Delivery:

Free UK Delivery. For further information, you can visit https://www.ssdd-motorsport.com/shipping-returns/

For overseas shipping, the package size is 140cm x 30cm x 10cm

Installation:

General Installation Guide information at https://www.ssdd-motorsport.com/fitting-installation-general-guide-information-and-our-partners/